[root/]# smartctl -v 9,seconds -v 200,writeerrorcount /dev/hda smartctl version 5.1-18 Copyright (C) 2002-3 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: FUJITSU MHR2040AT Serial Number: NJ41T291391J Firmware Version: 40BA Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 1 Local Time is: Thu Sep 4 22:18:48 2003 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Off-line data collection status: (0x00) Offline data collection activity was never started. Auto Off-line Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete off-line data collection: ( 468) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Automatic timer ON/OFF support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 60) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 52685626284 2 Throughput_Performance 0x0005 100 100 020 Pre-fail Offline - 0 3 Spin_Up_Time 0x0003 093 093 025 Pre-fail Always - 24065 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 160 5 Reallocated_Sector_Ct 0x0033 099 099 024 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 131071 8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0 9 Power_On_Seconds 0x0032 092 092 000 Old_age Always - 1335h+10m+34s 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 150 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 7 193 Load_Cycle_Count 0x0032 074 074 000 Old_age Always - 95890 194 Temperature_Celsius 0x0022 090 100 000 Old_age Always - 57 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 10141348 196 Reallocated_Event_Count 0x0032 099 099 000 Old_age Always - 30 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Write_Error_Count 0x000f 036 033 060 Pre-fail Always FAILING_NOW 2883583 203 Run_Out_Cancel 0x0002 091 091 000 Old_age Always - 2589872160305 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged