smartctl version 5.22 Copyright (C) 2002-3 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: MAXTOR 4K080H4 Serial Number: 674119014987 Firmware Version: A08.1500 Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1 Local Time is: Mon Oct 27 14:30:17 2003 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 112) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 44) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 50) minutes. SMART Attributes Data Structure revision number: 11 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0029 100 253 020 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 075 074 020 Pre-fail Always - 3135 4 Start_Stop_Count 0x0032 100 100 008 Old_age Always - 54 5 Reallocated_Sector_Ct 0x0033 098 097 020 Pre-fail Always - 14 7 Seek_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0 9 Power_On_Hours 0x0012 072 072 001 Old_age Always - 18875 10 Spin_Retry_Count 0x0026 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 008 Old_age Always - 53 13 Read_Soft_Error_Rate 0x000b 100 085 023 Pre-fail Always - 0 194 Temperature_Celsius 0x0022 093 088 042 Old_age Always - 20 195 Hardware_ECC_Recovered 0x001a 028 002 000 Old_age Always - 1472864733 196 Reallocated_Event_Count 0x0010 100 099 020 Old_age Offline - 0 197 Current_Pending_Sector 0x0032 100 100 020 Old_age Always - 2 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x001a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 28 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Timestamp = decimal seconds since the previous disk power-on. Note: timestamp "wraps" after 2^32 msec = 49.710 days. Error 28 occurred at disk power-on lifetime: 18785 hours When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 d1 38 ce 8f 40 e0 Error: UNC Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c8 00 38 ce 8f 40 e0 40 315.769 READ DMA c8 00 40 c6 8f 40 e0 40 311.634 READ DMA b0 00 01 01 4f c2 e0 1f 284.485 [Reserved SMART command] b0 00 01 06 4f c2 e0 34 284.470 [Reserved SMART command] b0 00 01 00 4f c2 e0 34 284.399 [Reserved SMART command] Error 27 occurred at disk power-on lifetime: 18785 hours When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 38 ce 8f 40 e0 Error: UNC Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c8 00 40 c6 8f 40 e0 40 311.634 READ DMA b0 00 01 01 4f c2 e0 1f 284.485 [Reserved SMART command] b0 00 01 06 4f c2 e0 34 284.470 [Reserved SMART command] b0 00 01 00 4f c2 e0 34 284.399 [Reserved SMART command] b0 00 00 00 4f c2 00 34 284.328 [Reserved SMART command] Error 26 occurred at disk power-on lifetime: 18744 hours When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 d1 08 bf 00 30 e0 Error: UNC Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c8 00 08 bf 00 30 e0 30 134.258 READ DMA c8 00 08 cf 3d 34 e0 34 134.247 READ DMA c8 00 08 af 00 34 e0 34 134.215 READ DMA c8 00 28 6f 3e 28 e0 28 134.213 READ DMA c8 00 08 67 3e 28 e0 28 134.201 READ DMA Error 25 occurred at disk power-on lifetime: 18619 hours When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 07 89 67 10 e3 Error: UNC Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c8 03 08 88 67 10 e3 10 54.493 READ DMA c8 03 08 88 69 08 e3 08 54.483 READ DMA c8 03 08 88 67 08 e3 08 54.471 READ DMA c8 02 08 88 69 ec e2 ec 54.464 READ DMA c8 02 08 88 67 ec e2 ec 54.439 READ DMA Error 24 occurred at disk power-on lifetime: 18619 hours When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 06 8a 67 0c e2 Error: UNC Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c8 02 08 88 67 0c e2 0c 49.281 READ DMA c8 02 08 88 69 08 e2 08 49.270 READ DMA c8 02 08 88 69 04 e2 04 49.259 READ DMA c8 02 08 88 69 00 e2 00 49.257 READ DMA c8 02 08 50 5c 00 e2 00 49.254 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 80% 18841 0x001f807f # 2 Extended offline Completed: read failure 80% 18673 0x020c678a # 3 Extended offline Completed: read failure 80% 18505 0x020c678a # 4 Extended offline Completed: read failure 80% 18338 0x020c678a # 5 Extended offline Completed: read failure 90% 18229 0x00408f96 # 6 Extended offline Completed: read failure 80% 18171 0x02386789 # 7 Extended offline Completed without error 00% 18051 - # 8 Short offline Completed without error 00% 18051 - # 9 Extended offline Completed without error 00% 18003 - #10 Extended offline Completed without error 00% 17836 - #11 Extended offline Completed without error 00% 17668 - #12 Extended offline Completed without error 00% 17501 - #13 Extended offline Completed without error 00% 17334 - #14 Extended offline Completed without error 00% 17166 - #15 Extended offline Completed without error 00% 16999 - #16 Extended offline Completed without error 00% 16831 - #17 Extended offline Completed without error 00% 16664 - #18 Extended offline Completed without error 00% 16603 - #19 Extended offline Completed without error 00% 16497 - #20 Extended offline Completed without error 00% 16329 - #21 Extended offline Completed without error 00% 16163 -